Estimated numbers for 510 engine swaps

Engine Weight Dist F/R Wheel HP 0-60 5-60 0-100 1/4mi LB/WHP
L20B 2150 51.5/48.5 95 8.3 9 31 16.4@82 22.6
LZ22 2150 51.5/48.5 115 7.5 8.4 22.3 15.7@87 18.7
LZ22 (Rebello) 2150 51.5/48.5 155 6.1 6.8 15.7 14.6@97 13.9
CA18DET 2150 51.5/48.5 170 5.5 6.4 13.9 13.9@99 12.7
SR20DE 2200 52/48 130 6.6 7.5 18.4 15.1@91 16.9
SR20DET 2250 52/48 210 5.3 6.1 12.8 13.6@104 10.7
KA24E 2300 52.5/47.5 130 6.5 7.4 18.5 15.15@91 17.7
KA24DE 2300 52.5/47.5 145 6.3 7.1 18.2 14.9@93 15.9
VG30E 2325 53/47 135 6.5 7.3 18.5 15.2@91 17.2
VG30ET 2375 53.5/46.5 200 5.4 6.1 13.0 13.7@103 11.9
VG30DE 2450 54/46 185 5.4 6.1 13.9 13.9@99 13.2
VG30DETT 2550 55/45 335 4.8 5.6 9.8 12.8@114 7.6
VQ35DE (350Z) 2375 53.5/46.5 245 5 5.7 12.3 13.4@107 9.7

All engine assume mostly stock setup, turbo cars assume stock turbos with more boost on pump fuel, and OEM  injectors except VG30DETT is webmaster's Stage V+ tune (still stock turbos however).

Except for the VG30DE and DETT the numbers are estimates and things like 1/4mi time can vary quite a bit so this is just a guideline. The "5-60" column are my estimates for a Car & Driver style run to 60mph starting wit the car rolling at idle in 1st and flooring it, you'll find two cars with same HP that with the same gearing, the torquier engine will be quicker.

The below chart is the same as above except sorted by 0-60 so you can see which combinations are similar in power.

Engine Weight Dist F/R Wheel HP 0-60 May-60 0-100 1/4mi LB/WHP
VG30DETT 2550 55/45 335 4.8 5.6 9.8 12.8@114 7.6
VQ35DE (350Z) 2375 53.5/46.5 245 5 5.7 12.3 13.4@107 9.7
SR20DET 2250 52/48 210 5.3 6.1 12.8 13.6@104 10.7
VG30ET 2375 53.5/46.5 200 5.4 6.1 13 13.7@103 11.9
VG30DE 2450 54/46 185 5.4 6.1 13.9 13.9@99 13.2
CA18DET 2150 51.5/48.5 170 5.5 6.4 13.9 13.9@99 12.7
LZ22 (Rebello) 2150 51.5/48.5 155 6.1 6.8 15.7 14.6@97 13.9
KA24DE 2300 52.5/47.5 145 6.3 7.1 18.2 14.9@93 15.9
VG30E 2325 53/47 135 6.5 7.3 18.5 15.2@91 17.2
KA24E 2300 52.5/47.5 130 6.5 7.4 18.5 15.15@91 17.7
SR20DE 2200 52/48 130 6.6 7.5 18.4 15.1@91 16.9
LZ22 2150 51.5/48.5 115 7.5 8.4 22.3 15.7@87 18.7
L20B 2150 51.5/48.5 95 8.3 9 31 16.4@82 22.6